![]() | ![]() | ![]() | ![]() | ![]() |
---|
*To learn more about each product, click on the image above, or scroll down below.
EMC2 Products
Engineered Marine Coatings was founded with the idea of bringing to market a marine polyurethane system technology that would be easy to apply, deliver the highest level of gloss and gloss retention, maximize abrasion resistance for marine use and meet current and future environmental guidelines. Professional applicators in the pleasure boat market are not satisfied with the products that are currently available. The same paints have been produced since the late 1970s — they were difficult to apply then and continue to be difficult to apply to large surfaces such as pleasure boats. If a product is hard to apply, then it is unlikely to meet the owners' expectations in terms of gloss level, smoothness, and clarity as well as the coating system service life. Engineered Marine Coatings is dedicated to providing the boat owner and the paint applicator with a proven performance two-part polyurethane paint systems to deliver the optimum look and performance for the yachting market. Their polyurethane coating system for pleasure boats is called Quantum99.
​
​
*For more information, refer to the EMC2 Brochure link here.
Quantum99 Polyurethane Topcoat is a two-component acrylic-polyester hybrid coating engineered for beauty and protection in harsh marine environments. This high solids topcoat provides superior protection and beauty to watercraft, aircraft, and other specialty equipment requiring excellent chemical and weather resistance, excellent reparability, superior durability, superior stain resistance, and superior DOI. Available in standard marine, metallic, and custom colors.
​
USES: Quantum99 Polyurethane Topcoat is used as an ultra hi-gloss finish coat for spray and brush/roll applications (also available in 2K aerosol cans). Though specifically designed to withstand harsh marine environments and aerospace specifications, Quantum99 is suitable for almost any application requiring beauty, UV protection, and abrasion/chemical resistance. For exterior and interior use. Do not use below the waterline.
*For more information on Quantum99 Polyurethane Topcoat, click on the hyperlink, or on the image to the left.

Quantum45 Chromated Epoxy Primer is a high-performance two-component strontium chromate epoxy primer designed for use on aluminum and steel with excellent corrosion and chemical resistance.
USES: Quantum45 Chromated Epoxy Primer is designed to prime and seal old and new properly prepared metal surfaces to provide superior corrosion protection and chemical resistance. It may be coated directly with Quantum99 Polyurethane Topcoat or further primed with other Quantum45 Epoxy Primers where higher build and fairing are necessary. Quantum45 Chromated Epoxy Primer may be used above or below the waterline.

QuantumUV is a self-sealing clear urethane varnish finish system specially formulated for marine brightwork. This high solids 2K hybrid urethane provides superior protection and beauty to all timber substrates.
USES: By chemically bonding to the wood on a molecular level this low VOC, easy to apply coating provides a durable, flexible finish in even the harshest marine environments. This high solids, high build finish system is available in satin and gloss and can be applied via spray or brush application. For interior or exterior use above the water line only.
For more information on QuantumUV, click on the following link to access the Technical Data Sheet:
http://quantumpaint.com/wp-content/uploads/2017/02/6-QUANTUM-UV-TDS-REV-2.pdf

Quantum99 Urethane Spray Reducer This spray reducer is to be used Quantum99 topcoats and in QuantumUV varnish as specified on the product's label under thinning directions and on the Technical Data Sheet.
• Use in Quantum99 Polyurethane Topcoat and QuantumUV Urethane Varnish.
• Developed for substrate temperatures between 70°-95°f.
Quantum99 Cool Weather/Fast Reducer
Use as specified on the product's label under thinning directions and on Technical Data Sheet.
• Use in Quantum99 Polyurethane Topcoat and QuantumUV Urethane Varnish.
• Developed for substrate temperatures between 55°-70°f.
• Can also be used to clean spray equipment.
Quantum99 Warm Weather/Slow Reducer Use as specified on the product's label under thinning directions and on Technical Data Sheet.
• Use in Quantum99 Polyurethane Topcoat and QuantumUV Urethane Varnish.
• Developed for substrate temperatures between 90°-105°f.
Quantum99 Brushing Reducer
Use as specified on the product's label under thinning directions and on Technical Data Sheet.
• Use in all Quantum99 Polyurethanes, QuantumUV, Q45, and Q30 Primers.
• Developed for substrate temperatures between 65°-105°f.
​
Quantum45 Epoxy Spray Reducer
Use as specified on the product's label under thinning directions and on Technical Data Sheet.
• Use in Quantum45 High Build, Epoxy Surfacing Primer, Clear Epoxy Sealer, and Quantum30 Corrosion Inhibitor Primer.
• Developed for substrate temperatures between 55°- 95°f.
QuantumVOC Compliant Reducer 350 grams per liter VOC
Ideal in areas with low VOC guidelines. Use as specified on the product's label under thinning directions and on Technical Data Sheet. Meets all current VOC guidelines.
• Low VOC reducer with VOC of 350 grams per liter.
• Use in all Quantum99 Polyurethanes, QuantumUV, Q45, and Q30 Primers.
QuantumVOC Exempt Reducer 0 grams per liter VOC
This reducer uses exempt VOC compliant solvent to reduce EMC products' total VOC. Use as specified on the product label under thinning directions and on Technical Data Sheet.
• For use when “O” VOC thinner is desired by the applicator.
• Can be used in all Quantum99 Polyurethanes, QuantumUV, Q45, and Q30 Primers.
• Developed for temperatures between 55°-75°f.
For more information on Quantum Solvent/Reducer, click on the following link to access the Technical Data Sheet:
http://quantumpaint.com/wp-content/uploads/2017/02/6-QUANTUM-UV-TDS-REV-2.pdf

Quantum33 RTU Aluminum Surface Conditioner
Quantum33 is a non-flammable, prediluted phosphoric acid-based cleaner and conditioner for aluminum. Conditioning with Quantum33 produces a corrosion-free, chemically clean aluminum surface. Quantum33 should not be used with high copper-containing aluminum alloys.
• Ready-to-use as supplied, no complex dilutions required.
• Creates a chemically clean surface for priming.
• Enhances corrosion protection of the Quantum system.
Quantum SR-002 Surface Prep Cleaner
Formulated specifically as a degreaser and de-waxer to properly clean the surface prior to painting.
• Special solvent blend provides ultimate cleaning which minimizes defects caused by contamination.
• Medium-slow blend designed for a two rag wipe-on, wipe-off surface cleaning method.
• Excellent tool and equipment cleaner.
​
Quantum Urethane Accelerator Solution
Quantum99 Urethane Accelerator is to be used to accelerate the dry time of EMC’s Quantum99 Polyurethane Topcoats and Varnish. This product is for urethane topcoats only
– DO NOT USE WITH PRIMERS.
• Accelerates cure and dust-free times for Quantum99 Polyurethane Topcoat and QuantumUV Urethane Varnish.
• Built-in pot life extender minimizes the effect on pot life.
Quantum Fisheye Eliminator
Quantum Fisheye Eliminator is to be used where minor surface contamination is suspected. This additive is to be used with Quantum99 Polyurethane Topcoat and QuantumUV Urethane Varnish to prevent cratering, crawling, and fisheyes caused by minor surface/air contamination. Fisheye Eliminator is not a substitute for poor surface preparation and will not overcome severe surface contamination. This product is for topcoats only – DO NOT USE WITH PRIMERS.
• Eliminates fisheyes caused by minor surface and air contamination.
• Not a substitute for poor surface prep.
• Recommended for Quantum99 Topcoat and QuantumUV Urethane Varnish.
Quantum Flattening Paste
Quantum Flattening Paste reduces the gloss of Quantum99 Polyurethane & Varnish to a flat or semi-gloss finish. Best results can be achieved when Quantum99 is sprayed.
• Flattening paste is added to the mixed polyurethane and varnish to lower the gloss.
• It can be used to create a semi-gloss or flat level of gloss.
​
Quantum Cold Cure Epoxy Accelerator
Quantum45 Cold Cure Epoxy Accelerator maintains cure times of Quantum45 and Quantum30 Epoxy primers in cooler weather and can reduce cure times by as much as 50% in standard conditions.
• Accelerates dust-free, recoat, and sandable times of Q45 and Q30 epoxy primers.
• Minimal effect on pot life in standard conditions.
Quantum Anti-Skid Additive - Fine
This anti-skid additive is a hard yet light, dry compound. It is able to resist high traffic on deck and should be mixed with Quantum99 Polyurethane and QuantumUV Varnish to create a fine-grit footing on deck. This is the “fine” grit particle size.
• It is ideally suited for decks on boats to ensure solid footing.
• This is a “fine” grain anti-skid additive for Quantum Polyurethane and Varnish.
Quantum Anti-Skid Additive - Coarse
The coarse anti-skid additive is a hard yet light, dry compound. It is able to resist high traffic on deck and should be mixed with Quantum99 Polyurethane and QuantumUV Varnish when a more rough footing texture on deck is desired. This is the “coarse” grit particle size.
• This is a “coarse” grain anti-skid additive for Quantum Polyurethane enamels and Varnish.
• It is ideally suited for decks on boats to ensure an even greater footing.
For more information on Quantum45 Chromated Epoxy Primer, click on the following link to access the Technical Data Sheet: