
Quantum Reducer/Cleaners
Quantum99 Urethane Spray Reducer
This spray reducer is to be used Quantum99 topcoats and in QuantumUV varnish as specified on products label under thinning directions and on the Technical Data Sheet.
• Use in Quantum99 Polyurethane Topcoat and QuantumUV Urethane Varnish.
• Developed for substrate temperatures between 70°-95°f.
Quantum99 Cool Weather/Fast Reducer
Use as specified on products label under thinning directions and on Technical Data Sheet.
• Use in Quantum99 Polyurethane Topcoat and QuantumUV Urethane Varnish.
• Developed for substrate temperatures between 55°-70°f.
• Can also be use to clean spray equipment.
Quantum99 Warm Weather/Slow Reducer
Use as specified on products label under thinning directions and on Technical Data Sheet.
• Use in Quantum99 Polyurethane Topcoat and QuantumUV Urethane Varnish.
• Developed for substrate temperatures between 90°-105°f.
Quantum99 Brushing Reducer
Use as specified on products label under thinning directions and on Technical Data Sheet.
• Use in all Quantum99 Polyurethanes, QuantumUV, Q45 and Q30 Primers.
• Developed for substrate temperatures between 65°-105°f.
Quantum45 Epoxy Spray Reducer
Use as specified on products label under thinning directions and on Technical Data Sheet.
• Use in Quantum45 High Build, Epoxy Surfacing Primer, Clear Epoxy Sealer and Quantum30 Corrosion Inhibitor Primer.
• Developed for substrate temperatures between 55°- 95°f.
QuantumVOC Compliant Reducer 350 grams per liter VOC
Ideal in areas with low VOC guidelines. Use as specified on products label under thinning directions and on Technical Data Sheet. Meets all current VOC guidelines.
• Low VOC reducer with VOC of 350 grams per liter.
• Use in all Quantum99 Polyurethanes, QuantumUV, Q45 and Q30 Primers.
QuantumVOC Exempt Reducer 0 grams per liter VOC
This reducer uses exempt VOC compliant solvent to reduce EMC products total VOC. Use as specified on products label under thinning directions and on Technical Data Sheet.
• For use when “O” VOC thinner is desired by the applicator.
• Can be used in all Quantum99 Polyurethanes, QuantumUV, Q45 and Q30 Primers.
• Developed for temperatures between 55°-75°f.